Fiat Coupe 20vt Idle Control Valve removal.
This is the idle control valve:
Electrical connector removed (notice the dumb-ass that I am removed the push in spring! Duh!):
Screws removed (2 Torx-30 screws):
Valve removed (just lifts off):
Dirty (pre card cleaner spraying) valve:
Clean valve (sprayed to death with Wynn's carb cleaner!!), doesn't actually look cleaner, but I kept spraying carb cleaner in until it was coming out fairly clear, giving a shake out too:
Fitting back on is just as easy as taking it off.